CNHYBOND 945(halogen-free)

Tape primer/Promote adhesion/adhesion promote

Technical Data

Product Description

CNHYBOND 945 Tape primer(halogen-free and low ordor) can be used to promote adhesion of double side adhesive(such as ,  9080 , 9448 , Japan 5000NS, SONY T4000 , T4720 , TESE4940 etc.) to surfaces such polypropylene，EPDM,TPU,ABS,PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. IT is success replace : .it is used for solar film , windowsfilm, Auto foil, 3D Carbon Film，3D Carbon fiber sticker vinyl film, chrome Trim, Rain or shine gear, Car Trim Strip, Soft PVC Decorative Line, EPDM seal strip,  EPDM seal tape(strip), Rubber seal for car truck door and window

945primer can be used to promote adhesion of Car Wrapping Vinyls to surfaces such as edges and deep recesses where usually you might see lifting of the Vinyls. O

Typical Physical properties and Performance Characteristics

Note:The following technical information  and data should be considered representative or typical only and should not be used for specification purposes

Solids:              Approximately 5%-8%

Color:              clear light yellow

Flashpoint:          -4℉(-20℃)

Net Weight:         750-800grams per liter

Viscosity:           10±5cps

Application Techniques

Surface preparation:

The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a Isopropyl ,Alcohol or Alcohol, acetone  ,Alcohol, A clean lint-free cloth should be used

Application:Shake CNHYBOND 945primer well before using:

Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 945 primer to dry thoroughly before applying tape. This is usually accomplished in 3-5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 945 primer for uniform coverage and good adhesion..

Allow first application of primer  to dry before applying the second coat, CNHYBOND primer 945 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment

Clean up:

Cnhybond 945 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required

Shelf life
      12 month s from date of manufacture when stored in the original container at 15-27℃

   Keep cnhybond tape 945 primer in the original container

   Keep original container tightly sealed to avoid solvent evaporation

NOTE:

The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for ther results obtained by others over whose methods we have no control.it is they user,s responsibility to determine suitability for the user,s purpose of any production methods mentioned herein and to adopt such precautions as many be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.